Improved Clamp Pads for Rockwell RK9033 JawStand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Larger and sturdier clamp pads for the original Rockwell JawStand.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The Rockwell JawStand (see https://piphardware.com/product/rockwell-jawstand/) is a handy piece of gear. Beyond its intended use as a woodworker's sawing support stand, the moderate cost and built-in 90 degree tilt clamp function has made it a favorite for sport rocket launchers and other applications where the full horizontal-to-vertical angle adjustment is crucial.
This simple part is to improve the plastic clamp pads on the original RK9033 JawStand, which are undersized and made of a brittle plastic that doesn't hold up well, especially in outdoor use. They will eventually deteriorate and shatter - see the photos for what happened to one of mine after several years.
These replacement pads have about 80% more contact area than the originals. Mount them with M4x8 stainless screws and hex nuts. You can also re-use the original fasteners, but they are low grade and prone to corrosion.
The OnShape CAD file is here: https://cad.onshape.com/documents/f18df33b058179dc8d87dfd5/w/84e499e2171ea934252e32cb/e/15ec33f07ed4797ce7181e01
For more info on improving the JawStand, see my GitHub project with a parts list and instructions for upgrading all the fasteners to stainless steel and making a few other changes: https://github.com/dbcook/jawstand_upgrade
Material: PETG
Nozzle: 0.4
Layer height: 0.25
Infill: 100%