USS Dry Box Labeling System

See also the design 'USS Dry Box Labeling System (INDX Required)'.

20261028 Update:

• Add tolerance to the labels box lid

• Add chamfers to the bottoms of the labels box and its lid

20261025 Update:

• Add new types: TPU 40D, TPU 95A

• Add new colors: Sky Blue, Ultramarine Blue

• Rework the label box to be less complex and actually scale

• Print the label box in PLA

• Adjust all 3mf files for INDX

20260825 Update:

• Added labels for brands

• Added labels for colors

• Added a box for labels

• Updated all 3mf files

• Move the FreeCAD assemblies back into the main file

Description

This USS Dry Box labeling system puts tags on the exterior of the dry box for better visibility and ease of use.

The labels are fully compatible with those published by Prusa.

The system works by attaching/glueing brackets on the outside of the USS Dry Box. Brackets are available in single tag or double tag versions. The brackets can be attached/glued directly onto a flat part of the dry box. If attaching/glueing to a round part is desired then first the appropriate seat should be attached/glued to the round part, after which a bracket can be attached/glued to the seat.

Fitters are available both for the brackets themselves and for the seats; lay them on the dry box, push them into the bottom/side of the dry box and put the bracket/seat into the fitter to attach/glue it to the dry box.

Many ready made labels are available already.

The FreeCAD file is provided for easy adaptation of the models.

The FreeCAD file 'USS Dry Box Labeling System.FCStd' has a VarSet under the 'master' group which holds many parameters that can be tuned (but really should not). The main parameter that can be adjusted is the 'seatgluestickerthickness' parameter in case a seat is not attached/glued directly onto the dry box but a sticker is used.