Lamp Rebuild with 2 USB and 2 US outlets for night stand.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use the parts of an Amazon lamp to build your own to your specifications.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
We wanted to reduce clutter around my bedside table so we ordered a lamp with USB plugs. It arrived from Amazon with the base broken. In Amazon fashion, they just sent me another one. So I thought I would design “better” one for my needs and reuse the parts. This is my second real project with Fusion 360 so I'm sure there are better ways to do things but we have to start somewhere.
Print the base with the outlet sides down on the print bed so no supports will be needed. I think it took 13-14 hours to print. The other parts (bottom and knob) are self explanatory. I removed my initials on knob but I uploaded the Fusion file if you wanted to customize it.
Assembly: Break apart the original base and break apart original the knob because it was glued on. Cut off the connectors and remove the components and install them in the base and reconnect the wires using screw on wire connectors. Use M3 with .5mm treads (most common) to screw on the bottom.
Lamp link.
Wire connectors