Microphone Hanging/Suspension Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang microphones by their XLR cable and adjust the orientation
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 9
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
This part allows to hang microphones by their XLR cable and adjust their orientation.
Panning: Turn the cable relative to the clip or turn the microphone thread.
Tilting: Use a standard microphone clip with tilting mechanism.
It tries to achieve the same goal as the product Neumann MNV 87 mt (319€).
The microphone thread is the big type (5/8" UNF, 16 threads per inch, roughly 15mm diameter).
Printing
Print the clamp horizontally on the bed and the microphone-thread upright (as given). Don't use supports or rafts (there's 1mm of tolerance for bridge sagging at the dovetail joint).
I used PETG and 0,2mm layer height.
Assembly
Join both pieces at the dovetail joint. It should slide in with a bit of force and stay there.
Use an M4 bolt with hex head (alternative: use a different head and screw an M4 nut to the head) and push it throught the hole in the clip. Attach an M4 nut to the other side (wing nut recommended for ease of use).