LayersFactory
Report model
1 / 15
KAP-40 kit for AAP-01 — image 1
1 / 15

KAP-40 kit for AAP-01

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Numilyash

Numilyash

@Numilyash_5059128

My own KAP-40 kit for AAP-01. Two colors print, PLA

Rating
0 / 5
Likes
1
Downloads
30
Makes
0
Views
330
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Other Toys & Games
License
Creative Commons — Attribution — Noncommercial
DetailsFiles (17)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (5)Related

Thanks to this two posts (AAP-01 model and KAP-40 model) made a kit of my favorite pistol. Just want to share my happiness
Need a one M5*10 bolt for back part, two M3*30 for connection lower to upper, two M3*20 for connection lower parts, twelve M3*12 to connect Piccatini and one M3*12 (important! here length is precised to fix aap barrel) to connect barrel, lower and upper piccatini
Printed on K1 Max with PLA
On sight are 3 holes for luminous sticks (not tested)
Need to print two Connector.stl to connect lower parts. Side piccatini printed 3 times and are fully working
Decoration parts print in 2 examples and super-glueded (on upper are some excavation, you can just paint them black)
Instruction for assemble:

  1. Take together right and left lower parts with two connectors. I used super-glue with connectors

  2. Take together upper and lower parts of lower and than fix with two M3*20 screws

  3. Takeoff upper of AAP.

  4. Takeoff all sight parts from AAP.  Save one bolt from back sight (with 2 lightsticks)

  5. Takeoff Outer Barrel of AAP. Replace it with front upper model. Screws from it will be used to connect model

  6. Place "upper reciver back". You need to place a pin into blowback unit spring (check the construction in AAP-model link). Fix it with back-sight bolt in BACK hole.

  7. Place upper picattini and fix it with 4 screws. On back that must be M3*12 screw (it will connect piccatini, upper and barrel). Front 3 screws can be longer or shorter, i used same M3*12

  8. Place and fix with 9 M3*12 other piccatini

  9. Place upper on lower part of pistol

  10. Push lower-model assembly through magazine. Fix it to upper-model with horizontally M3*30 screws

  11. Click "back thingy_2" to "back thingy_1".

  12. Click "back thingy" to bolt and fix with M5*10. 

If you want to print decor (not paint it), maybe it will be better to scale to 90-95%. Than just super-glue it on placeholders.

UPD: added V1.1 version with 14L thread barrel and rifling

I am open to conversations and upgrades of my model, you can type me here or on my Reddit post

Tags

kitaap01aap01bodykitblackops2