Dessicant Holder for Yoopai Filament Dry Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a dessicant holder that should stay stationary in the box.
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 42
- Makes
- 1
- Views
- 223
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This box fits the Yoopai dry boxes:
https://www.amazon.com/dp/B0G6ZWQSVY
Here are some instructions:
Use PETG because it is a little more flexible and can be put in a filament dryer at a higher heat than PLA.
put the bottom flat on the build plate. make sure the diagonal of the top part is flat on the build plate.
change the print settings in Orca or bambu studio to have enough wall loops to include the tabs on the bottom piece that was 11 for me with a 0.6mm nozzle. (I am not sure this step is necessary, but I wanted the tabs solidly attached.)
Strength>Walls>Wall loops = 11Change the Top and Bottom shell to 0 layers.
Strength>Top/bottom shells>Top shell layers = 0
Strength>Top/bottom shells>Bottom shell layers = 0Change the infill density and pattern to create a wavy grid that seems to be strong enough and lets airflow through.
Strength>Infill>Sparse infill density>45
Strength>Infill>Sparse infill pattern>GyroidAlternatively you can change the Infill setting "Fill Multiline" to multiple line widths. This may be helpful because I was having trouble with the PETG sticking to the plate with such thin lines. I am currently printing with a 3 layer width and had to change the infill density to get smaller voids. You may have to play with this to get something that works for you. It also depends if you want to dump the beads in the containers or use packets.