1 / 2
NA Miata Breather Hose Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NA Miata Breather Hose Clips for Valve Cover Vent - Full Rubber Version
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
My miata had the full rubber hose instead of the chrome pipe with 2 rubber hoses, and the clips were broken. I remodeled what was there with a few print-ability changes. The vent hose on my car measured 16mm, so this is sized for that.
Since this is attached to the valve cover and right above the exhaust manifold, print these in something that can take the heat, ASA, PC, or PA.
I couldn't get the print to operate like the original with a snap-fit onto the bracket, so use a 3x10 SHCS or BHCS to secure it in place.