1 / 3

Waterdrop drop dispenser

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slightly overengineerd Waterdrop® drop dispenser with several quality of life features, for all your dropping needs.

Updated at source: Jul 18, 2026

Model information

This is a (slightly overengineerd) Waterdrop® drop dispenser with several quality of life features, for all your waterdrop dispensing needs.

Build-in label pocket:
You can put the top drop with the label forward, acting as dispenser label to see what drops are in said dispenser, no need for any additional printing.
You can still easily take out the label drop when it reaches the bottom by just pushing it to the back a little, there's a slot for it to drop down further.
If the "label drop" is annoying (when you are adding more drops), you can cut off the empty part, and insert just the lid of the drop, then it can stay put;
Dovetail joints: to keep several dispensers nice and together;
Viewing window: You can see how full your dispenser still is through its viewing "window";
Optional lid (with a cut-out version, when using different size dispensers);
Easy to dispense (drop) from the bottom;
Easy to fill:
- From top (there is a slot for "straight" insertion, just below the (optional) lid);
- From front (just rotate the drop 90 degree and insert it sideways and rotate it back internally);
There are 3 dispenser size variants:
- WD12: 12 Drops (Monsoon, 171mm high without lid)
- WD6: 6 Drops (Light drops, 90mm high without lid)
- WD4: 4 Drops (Drizzle, 64mm high without lid)