Lighted Base For Inner Engraved K9 Glass Crystal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lighted base for a 50x50x80mm K9 glass crystal inner engraving.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Lighted base for a 50x50x80mm K9 glass crystal inner engraving. This model uses a KC007 Remote Controlled 16-color RGBW Puck Light with a Diameter (Outer Diameter) of 62.2mm and 27.6 Height (Thickness). I had a couple of these KC007s that I had received in the box with one of my Bambu Lab printers. It prints with supports, that I have configured in the profile. If you use my settings, the supports remove very easily and without scarring the print. The example is printed in Sunlu Dark Brown Matte PLA. The model is designed for the puck to be press fit into the bottom and stays securely in place.