CM4-POE-UPS-BOX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a printable version of the box from the link below.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I used Onshape to create a case for the CM4-POE-UPS-BOX. This is a link to what I modeled this after: https://www.waveshare.com/cm4-poe-ups-base-en.htm?sku=22850. The lid for this model is friction fit. In the hole for the antenna, I added a hexagon indent so you can put the antenna in and it wont move around when you screw on the antenna. My motivation for making this was so that you could print the box and just buy the board without spending extra.
This is a link to Onshape for remixing: https://cad.onshape.com/documents/d2be98e0febb07fe89c91298/w/8fc2d8678582ec7dea5511fd/e/78810e30f0a1dfd69f10abd5