Mining Rig Fan Extender Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.60 – €1.96 net (excluding VAT)
For file: fanextender_0.2mm_PLA_40%infillnodrool_MK3S_2h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.78 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 2.08 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Extends fan mount for use with longer graphics cards (typically 13" or longer GPUs)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Designed to extend the fan assembly for mining rigs so that longer GPUs can still fit on the frame with the fans behind them. For example, MSI Gaming X Trio 3070/ti/3080 and Founders Edition RTX 3090.
Depending how many gpus you are planning to use, adjust the infill % accordingly. Gcode is 40% infill which should be plenty in most cases.
Tips welcome!
eth: 0x4839fda96254ddc8875fa036a708a584bfc8f86c
btc: 19t6moeLUjJnD1u7pxh5jBPe6ktknFPgUi
flux: 19t6moeLUjJnD1u7pxh5jBPe6ktknFPgUi
doge: DE2CK4ayn9D4k25iZYgeGwZEytd44f2Qdr