1 / 2

LP Cover Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

lcdguy

@lcdguy_94610

These are a collection of basic corner brackets to wall mount a standard LP album cover to a wall.

Rating: 5 / 5
Likes: 8
Downloads: 40
Makes: 0
Views: 273
Reviews: 1

Updated at source: Apr 26, 2022

Model information

Source: Printables
Category: Other House Equipment
License: Creative Commons — Attribution — Noncommercial

Details Files (5)Makes & comments (Makes: 0) (Comments: 2)Remixes (0)Collections (8)

This is a set of basic wall mount corner brackets to mount a standard LP album cover to a wall. If you just want to print a single set you only need the file LP Cover Holder Set.3mf. I included the 4 pieces as additional separate files for convenience. Print settings below.

Layer Height: 0.20mm

Material: PLA/PETG

Perimeters: 4

Enabled Detect Thin Walls (this was precautionary only).

In addition to the above 3d printed files you will need 4 countersunk screws and an appropriate anchor method (drill into studs, drywall anchors, etc.)