1 / 4
School locker disc detainer lock — image 1
1 / 4

School locker disc detainer lock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Working disc detainer furniture lock. 100% 3d printed. 1.75mm filament used as locking bar. 40x40 mm footprint.

Rating
0 / 5
Likes
52
Downloads
68
Makes
0
Views
594
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution

Lock for the doors where latch is on the left side. Mirror all parts for right side mounting lock. For current set of lock discs 64 possible keys exists. Adding Disc with 0 degrees rotation option extends it to 729 but it will introduce weaker spot in a key and it could break there.

Print as oriented in PLA 0.2 mm layer. Supports where touching build plate needed only for LockActuator.stl part. Be careful about z offset to avoid excessive elephant foot on discs. Use silicon grease on discs and spacers during assembling to make them sticky.

Yo need to print LockDisc90 5 times, LockSpacer 5 times and LockDisc45 i times for the provided key.

Assembling for provided key example:

  1. Insert greased LockDisc90 into LockActuator.

  2. Insert greased LockSpacer into LockActuator (narrower grove in LockActuator is intended for spacer tongue).

  3. Repeat steps 1 and 2 three times.

  4. Insert greased LockDisc45 into LockActuator.

  5. Now test the assembled core with the key when key rotated 90 degrees the groove on discs should line up with groove on  LockActuator.

  6. Insert LockFrontCover into LockFrontPlate

  7. Cut 18mm of 1.75mm filament. straighten it and place it into groove in LockFrontPlate

  8. Insert Assembled LockActuator into LockFrontPlate so the filament from step 6 will line up with wider groove on LockActuator

  9. Insert LockLatch into LockBackPlate so the  grove is facing up

  10. Place assembled LockFrontPlate on LockBackPlate  so the dimple on LockActuator goes into grove on LockLatch (LockLatch is in fully retracted position

  11. Test the lock with the key

Tags