ExoGuitar - Bridge - Tune O' Matic - Single Plate

Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com

Plan Your Build & Get Hardware

ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoGuitar - Bridge - Tune O' Matic - Single Plate, on our site.

Step 1 - Insert M8 Heat Set Inserts

While you are doing this, Strip 2 inches of a wire and wrap that around the outside of one of the heat set inserts. This will be your bridge ground wire.

Step 2 - Insert M5 Slide In Nuts to 2020 extrusion

Step 3 - Attach Bridge Plate to 2020 with M5x30 bolts

Step 4 - Attach Tune O' Matic

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $4.09 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $23.65.

• 6x Nut - Slide In - M5
• 6x Screw - Socket Head - M5x30
• 4x Heat Set Insert - M8 - 10mm OD - 12mm L