True-FLEX Featherboard with accessories (1/4-20 fasteners)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired from Kreg True-FLEX™ Featherboards There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to…
- Rating
- 4.857 / 5
- Likes
- 86
- Downloads
- 626
- Makes
- 6
- Views
- 2,410
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Inspired from Kreg True-FLEX™ Featherboards
There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%).
« TF_Featherboard.stl » need less material, but is a little harder to print (warping, stringing,...) and longer. Use it if your printer is well adjusted. Use 100% infill for this one. Support are optionals, but helps for the hoverang sections.
New (25/02/2019) : Added 2 shorter versions, inspired by one of the remix
You can print many featherboard and stack them, just use two « TF_Spacer.stl » between each. You can stack 2, 3, 4... or more featherboards, usefull for resawing big parts on a bandsaw for example.
For T-Track/T-Slot you can use a 1/4-20 hex bolt, the lenght depend of how many featherboard you stack.
For miter gauge track, I provide an 'adapter' that works with 1/4-20 hex bolts too
Also, I designed a knob for a 1/4-20 nut.
Print with tought material (abs, petg,...), remember it is a safety part !
Print instructions
Category: Parts