1 / 5
Parasaurolophus Skull Capsule — clamshell trinket / pill box — image 1
1 / 5

Parasaurolophus Skull Capsule — clamshell trinket / pill box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A detailed Parasaurolophus dinosaur skull that splits at the mouth and swings open on a hidden snap-together hinge

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A detailed Parasaurolophus skull that splits at the mouth seam and swings open on a hidden snap-together hinge, revealing a small interior pocket. A little keepsake capsule — stash a pill, a tiny charm, a ring, or a tightly rolled note inside the dinosaur's head.

What it is

  • Two printed parts, no hardware. The lower half carries a captive hinge pin; the upper half's two C-clip knuckles snap over it (>180° wrap) and click home. Opens and closes like a tiny jaw.

  • A pocket-sized capsule, not a storage box — the cavity is roughly finger-tip sized. Perfect for a pill/vitamin, a keepsake charm or ring, or a hidden note.

Printing

  • PETG recommended. The hinge is a living snap joint — the C-clip knuckles flex over the pin on assembly, and PETG survives that snap where brittle PLA can crack. (This copy was printed in PETG.)

  • 0.2 mm layers, 3 walls, 10–15 % infill.

  • Brim + supports are mandatory — it's an organic shell with tiny bed contact. Support-on-build-plate is enough.

  • Print both halves on their SIDE (hinge pin vertical): the captive pin prints round with no sag, and the C-clip snaps flex in the layer plane (strong) rather than across layers (which would crack them). One cheek picks up support scars — put the show side up.

Assembly (once, ~5 s)

Line up the lid's two outboard C-clip knuckles with the ends of the tub's centre pin and press down until they wrap the pin and click. Done — it now hinges.

⚠ Not airtight or watertight, and it's a friction/snap fit — a keepsake capsule, not a sealed or drop-proof container.

The parametric source is attached.

Tags