1 / 3
Universal Razor Travel Cover with Filament Hinge — image 1
1 / 3

Universal Razor Travel Cover with Filament Hinge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small, ventilated Box to cover the Blades of your cartridge razor so they're protected

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
34
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an almost universal cover for all your razors. 

Fits even razors with big blades. 

The box has ventilation holes on the bottom to make sure your razor dries out completely even when in the cover.

 

For assembly, carefully remove all supports. Cut a piece of 1.75mm filament to rougly 7cm in length. Now, lay the lid onto the box. Carefully push the filament through the cylindrical holes of the hinge, so it acts as the hinge pin. Cut filament to final length so it doesn't protrude from either side. If the filament fits tight enough, you can leave it as is. In case you're worried the filament piece might fall out, simply place a drop of superglue on the end of the filament, being careful to only glue it to the lid part of the hinge.

 

Printed in Bambu PLA Silk+ on my A1mini.

Tags