Door knob-latch drill guide with router mortising
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alignment guide for drilling of door knob hole and latch assembly for 1 3/8" thick slab doors
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Door knob guide for 2 3/8" offset to be drilled using a 2 1/8" hole saw or template router bit. Latch hole using the latch drill guide - Use a 7/8" hole saw or paddle bit, Remove the latch drill guide and using a 1/2" diameter/1/2" long template router bit to cut mortise for latch. When used with my hinge template the models are created with the top reference surface adjusted in order to allow router depth to be set once while allowing for proper mortise depth of both. Set the depth once and cut both as the latch requires 2mm deeper cut.