Construction - Concrete wall creation with embedded electrical piping - Electrical Piping Temporary Cap - 2 inch PVC Conduit Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 inch PVC Pipe Cap to aid conduit pipe attachment to form walls prior to concrete pouring for embedded piping.
- Rating
- 0 / 5
- Likes
- 2
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
A PVC pipe (2 inch diameter) cap that is used during concrete wall creation that require embedded electrical piping conduits to cap the ends at the form wall interface.
Slides inside the end of the pipe tightly and can be nailed to the concrete form wall to hold pipe in place without letting concrete enter into pipe. Once concrete wall form is set and form wall removed the cap can be extracted out of the end of the pipe.
Usage
Place Cap on end of PVC pipe (2 inch diameter). Using the 3 nail holes attach to the form wall. Pour concrete into form and await setting. Once Concrete has set and form walls are removed the cap should be visible. Poke hole through end of cap (it is a very thin covering) and pull cap out of pipe.