1 / 1
Mercedes-Benz V-Class / Vito W447 MagSafe insert holder — image 1

Mercedes-Benz V-Class / Vito W447 MagSafe insert holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

CZ: MagSafe insert pro středovou konzoli Mercedes V-Class/Vito W447 místo Peiker modulu. EN: MagSafe insert for Mercedes

Rating
0 / 5
Likes
8
Downloads
12
Makes
0
Views
364
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Mercedes-Benz V-Class / Vito W447 MagSafe insert

3D tištěný insert pro instalaci Apple MagSafe nabíječky do středové konzole Mercedes-Benz V-Class / Vito W447.

Model nahrazuje původní pozici telefonní přípravy Peiker ve středové přihrádce mezi 12V zásuvkou a originálním USB/MMI panelem. Výsledkem je čistě integrované bezdrátové nabíjení telefonu bez viditelných kabelů a univerzálních držáků.

Kompatibilita

Ověřeno na:

  • Mercedes-Benz V-Class W447

  • středová konzole s 12V zásuvkou, USB/MMI panelem a Peiker telefonní přípravou

Může pasovat i na jiné varianty W447 / Vito se stejným uspořádáním konzole. Před tiskem doporučuji ověřit podle fotek a rozměrů.

Přibližné rozměry modelu:

  • 72 × 129 × 12 mm

Tisk

Doporučený materiál:

  • ASA doporučeno

  • ABS také použitelné

  • PETG pouze opatrně

  • PLA nedoporučuji kvůli teplotám v autě

Doporučené nastavení:

  • vrstva 0,2 mm

  • 4–5 perimetrů

  • výplň 40–60 %

  • podpory: ano, doporučuji tisknout orientaci pohledovou stranou nahoru

Instalace

Vyjměte původní Peiker telefonní modul a nahraďte ho tímto insertem s MagSafe nabíječkou.

Napájení lze řešit ze spínaného 12V okruhu zásuvky ve středové konzoli přes vhodný DC-DC / USB-C PD modul. Doporučuji vlastní jištění, mechanické zajištění kabeláže a kontrolu zahřívání při delším nabíjení.

Co je potřeba

  • vytištěný insert

  • Apple MagSafe nebo rozměrově kompatibilní kulatá MagSafe/Qi nabíječka

  • USB-C PD/QC automotive napájecí modul 

  • vodiče, pojistka, smršťovačka / textilní páska

  • základní nářadí pro demontáž konzole - stačí torx T5 (4 šrouby, dva zboku pod krytkami a dva pod cupholderem)

Montáž a zapojení samozřejmě na vlastní riziko.


Mercedes-Benz V-Class / Vito W447 MagSafe Insert

3D-printed insert for installing an Apple MagSafe charger into the center console of a Mercedes-Benz V-Class / Vito W447.

The model replaces the original Peiker phone preparation module position in the center storage compartment, between the 12V socket and the original USB/MMI panel. The result is a cleanly integrated wireless phone charging solution without visible cables or universal mounts, because apparently we are still forced to fix what car manufacturers should have solved years ago.

Compatibility

Tested on:

  • Mercedes-Benz V-Class W447

  • center console with 12V socket, USB/MMI panel, and Peiker phone preparation module

It may also fit other W447 / Vito variants with the same center console layout. Before printing, I recommend checking the photos and dimensions.

Approximate model dimensions:

  • 72 × 129 × 12 mm

Printing

Recommended material:

  • ASA recommended

  • ABS also usable

  • PETG only with caution

  • PLA not recommended due to high temperatures inside the car

Recommended print settings:

  • layer height: 0.2 mm

  • walls/perimeters: 4–5

  • infill: 40–60%

  • supports: yes

  • recommended orientation: print with the visible/front side facing up

Installation

Remove the original Peiker phone module and replace it with this insert fitted with a MagSafe charger.

Power can be taken from the switched 12V circuit of the center console socket through a suitable DC-DC / USB-C PD module. I recommend adding a dedicated fuse, securing the wiring mechanically, and checking for heat buildup during longer charging sessions.

Required Parts

  • printed insert

  • Apple MagSafe charger or a dimensionally compatible round MagSafe/Qi charger

  • automotive USB-C PD/QC power module

  • wires, fuse, heat shrink tubing / automotive cloth tape

  • basic tools for center console disassembly: Torx T5 is enough: 4 screws, two on the sides under small covers and two under the cupholder

Installation and wiring are, naturally, at your own risk.

Tags