Gandalf the Grey Rivendell Staff

This is a digital 3D printable model of Gandalf the Grey's Rivendell Staff from The Lord of the Rings, which he used to defeat the Balrog.

📦 Included Files

• STL (cut for 200mm printer beds)

• Assembled OBJ file (for easy scaling)

• 3MF pre-supported, print-ready file

We recommend printing the cut version and inserting a 1/2 inch (or 12 mm) stick that is 1540 mm long into the 13 mm hole.

📏 3D Model Dimensions

At 100% scale, the model’s dimensions are approximate:
Width 190 mm
Length 83 mm
Height 1655 mm
You can scale the model as you wish, but we can’t guarantee that at a much smaller size the model will print well.

3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories, but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/