Festool Guide Rail Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix to split it into two parts for printing on the MINI and to add a lip so the splinter guard does not bear weight.
- Rating
- 5 / 5
- Likes
- 104
- Downloads
- 437
- Makes
- 3
- Views
- 3,553
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I have a Prusa MINI and could not print the full sized wall mount. So, I remixed this model to accomplish two things:
- Split it into two for ease of printing.
- Add a lip for the lower part of the mount so the splinter guard does not bear the weight of the rail. Instead, the metal portion of the rail bears the weight on the newly-created lip.
You will need a M5 25 mm screw and M5 nut to join the upper part to the knob.
NB: the lower part does not print well horizontally due to overhang issues. Printing it vertically works great. If you download the 'complete' file (.gcode), everything will be set up for you to print the two mounts for one rail (upper part, knob, and lower part) on a MINI.
If you choose to print the lower parts separately, rotate them in PrusaSlicer 90 degrees in the Y plane to make them vertical.
This is functional, not pretty. 0.25mm DRAFT mode with 20% infill works great. I recommend PETG for strength.
Enjoy!