1 / 1
Power Bank Toaster Dock - UGREEN 145W 25000mAh
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dual slot charging dock for the UGREEN 145W power bank (25000mAh)
- Rating
- 4 / 5
- Likes
- 43
- Downloads
- 105
- Makes
- 3
- Views
- 1,240
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A dock for 2 Ugreen power banks as detailed in the video above!
Hardware
2 x 25mm M3 screws for eject arm pivots
2 x 12 x 5mm springs (or similar)
2 x 12mm M3 countersunk screws
2 x UGREEN Cables (Ugreen US286)
Printing Instructions
I used PLA, but PETG should work fine.
No supports necessary for any of the parts, orientation should be obvious!
Assembly Instructions
Once everything is printed, it should be obvious how it goes together.
The arm mounts are glued to the bottom of the slots - superglue should be fine.