Super Drum 34 Holster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holster for Super Drum 34
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 2
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was thinking what if we can carry 1 or 2 extra Super Drum 34 on a proper dedicated carrier around or battle belt? That would be like having around 4 to 6 mags worth of standard size talon mags. So I decided to design this. Watched every Youtube Tinkercad tutorial needed and this is the result.
Would love see your makes and comments.
Print orientation and settings:
Printed with 3 walls and 15% infill
Supports only needed at the bottom (See attached screenshot)
Hardware:
Tactical Belt Clamp holster adapter. Rotatable or static type is up to you.
Just to point you at the right direction. I got mine here
You could show some love by buying me a coffee:
https://buymeacoffee.com/tfirefox
Update 15/08/2026:
Made the holes at the bottom tighter so that the mag won't rock right and left.
Update 05/08/2026:
It's all good to go. Enjoy!
Upate 04/08/2026:
Found that the SD34 edges are not flush, the height of the holder fell a bit short and the size was slightly too wide. So have increased the height and decreased the sides slightly to accommodate the off-set tabs at the sides of the holder. We are almost there. Still don't download and print just yet. Will do a final update when it's ready.
Update 02/08/2026:
I've built the Super Drum 34 and found that v1 does not fit as I thought it would. So I've modded it slightly and uploaded v2. However, don't download and print yet. Let me work out the kinks and I'll upload a final version.