Mamiya Press Mount Adapter to Instax SQ1 (or SQ6)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will allow a Mamiya Press lens to adapt to a modified Instax SQ1 instant camera
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This adapter will allow a Mamiya Press lens to be attached to an Instax SQ1 (or SQ6) instant film camera. You need to remove the Instax lens assembly and replace it with the adapter. The shutter and aperture will be controlled by the lens, and the old shutter button will just be used to eject and develop the film.
The Lens:
Mamiya press lenses are perfect for this application because they have their own aperture and shutter, to replace the Instax aperture and shutter within the deleted lens assembly. The image of Mamiya Press lenses fully covers the Instax film area, although there is some minor mechanical vignetting at the far corners created by the adapter. I'm using a Mamiya Press 100mm f2.8 in the photo. For context, in terms of how this lens appears on Instax sized format, the photos it takes at widest aperture resembles the photos that a 50mm f1.4 lens would take at widest aperture on 35mm film format. Another common lens for this application is the Mamiya 65mm f6.3, which is very compact, and probably better suited because getting correct focus is easier with a narrower aperture, albeit with less of the shallow DOF effect. The viewfinder of the Instax SQ1 approximates the field of view of a 65mm lens, so if using a different focal length, you would need an external viewfinder if you want to be able to frame images correctly.
How to Assemble and Rewire:
It requires the use of set screws (M2 x 6 mm cone point) to secure both the Mamiya lens to the adapter (x3), and the adapter into the camera (x2 or more). The three holes for mounting the lens to the adapter are modeled. The holes to secure the adapter to the camera body must be manually drilled (see photos), they aren't modeled. After the hole is drilled through: 1. the rotating on/off ring of the Instax, 2. the black plastic lens shroud of the Instax, and 3. the adapter, insert a set screw and screw it in until it is recessed deep enough that the outer ring can rotate, but the black lens shroud is secured to the adapter. See notes below about how the position of the holes affects focus.
The rewiring to enable the camera to eject and develop the film is surprisingly simple. See the "modified" wiring photo and compare to the "original" photo to see how the wires are reconfigured. I suggest soldering wires and wrapping with heat shrink tubing (not shown in photos). The new circuit bypasses the PCB, and the on/off switch of the rotating ring will disable the camera from ejecting the film accidentally, since it is very easy to press the film eject button when handling the camera. The photo ejection sequence timing works perfectly, even though the PCB is largely abandoned! Not quite sure how that works, honestly. It must be a mechanical process to stop ejecting the photo after a set time.
Achieving Correct Focus:
The flange focal distance will be influenced by where you drill your holes to secure the adapter into the Instax lens shroud. I modeled the adapter about 1mm short, so there is room to add a 1 mm foam rubber light seal. Keep in mind that the Instax camera was originally constructed with quite a high tolerance for variation in the position of the film within the cassette - and the stock lens uses a narrow aperture to minimize that impact. Keep this in mind if you mount a fast lens (like my 100mm f/2.8), and manage your focus expectations a bit. After some trial and error, I have a focus hit rate of about 50% at f2.8. I'm happy enough with the results to accept that.
Misc. Notes:
The integrated cold shoe mount is not quite big enough for many accessories, but it can be trimmed to size after printing.
Messing around to seal up light leaks will be required.
This setup attracts the most attention out of all my cameras. Strangers come up regularly to ask about it.