1 / 1
ID Badge holder with mustering token slot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ID Badge holder that has a slot for a mustering token
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Having been issued a mustering token at work, I wanted a badge holder that also held the token. The issue was that we have 3 models of mustering token and each one is a different size. Type A uses the "MikroTik TG-BT5-IN". Type B uses the "M4 Pro" and Type C uses the "M4" and "E8". Tolerances are VERY tight so make sure your supports are dialed in. Any bridge drooping will result in the token not fitting and lots and lots of sanding. My test prints all required very minor post processing (a light pass with a file to remove burrs).
