Banebots TPU Wheel Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printed wheel retainer intended for Banebots P61 gearboxes and Banebots Wheels. This part replaces the snap ring.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 11
- Makes
- 0
- Views
- 567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
A printed wheel retainer intended for Banebots P61 gearboxes and Banebots Wheels. This part replaces the snap ring that normally goes on the hub.
#10-32 x 1/2" screw with loctite is used to retain the hub to the gearbox shaft.
The STEP file is included.
Dimensions
Overall Width: 30mm
Overall Height: 7mm
Print Settings
Material: Overture Highspeed TPU - Grass Green
Vertical Perimeters: 4
Horizontal Perimeters: 5
Infill: 18%
Infill Type: Rectilinear
Printer Utilized: Voron 2.4
No supports or post processing is required
Category: R/C Vehicles