1 / 5
TT02F Low CG/Bumpsteer Servo Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TT02F Low CG/Bumpsteer Servo Plate to help correct bumpsteer and lower CG of the servo in the TT02F by The RC Racer
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
TT02F Low CG/Bumpsteer Servo Plate to help correct bumpsteer and lower CG of the servo in the TT02F by The RC Racer.
Printed in 1.75mm PETG. Enable supports 'for support enforcers only' (i.e. paint on supports) in PrusaSlicer and then block all holes from being supported and paint on supports for the two bridgeed areas in the middle. Alternatively flip the model and enable supports so that the two side 'wings' are supported.