Shulker Fidget Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small 3d printed Minecraft shulker with a key switch :)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Small Minecraft Shulker build with a mechanical switch to make a satisfying click sound :)
Instructions:
To build the Shulker, you need to print a top and a bottom half, plus the keychain part if desired.
I used basic PLA with 0.08 mm layer height and a 0.4 mm nozzle, printed on a Bambu Lab P1P.
Print time ~40min
You will also need a standard mechanical key switch and some super glue.
Apply a small amount of glue to the bottom half and press the switch into place.
Wait until the glue is fully cured.
Snap the top half into place.
You're done :)
Keychain (optional) Before attaching the top part, glue the small anchor piece into the hole on top.
Hope you have fun with the project