Wolf Guitar Pick
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.04 – €0.05 net (excluding VAT)
For file: Wolf Guitar Pick (thin)_0.4n_0.1mm_PLA_MK4S_2m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A guitar pick with a cool wolf logo
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 80
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
I've needed to print some guitar picks recently and none of the ones I printed satisfied me. So I figured I'd take a crack at one of my own.
This pick takes less than 5 minutes and only around a gram of filament. It looks good, but because it does not have the logo embedded in the pick; it does not compromise structural integrity. Which can lead to the pick bending easily when not thick, and feeling like its going to break with just normal use. I have also included a thick version and a thin version; which worked great for me. However I highly encourage you to play with the thickness to suite your own personal tastes.
For print instructions. I would recommend a layer height of 0.1mm. Any material is fine but standard PLA worked good for me. A pause and a color swap make the pick stand out. I've included a pause in the gcode files but if you are not using them then the pause is optional. Everything else is up to you
If you guys would like to see more picks like this, let me know in the comments.
Happy Printing