1 / 3
Rollei HS Freeze 2X & 1X to Softbox Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An interface to connect a Rollei studio flash directly to a softbox
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 5
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As no adapters were available online on short notice, I decided to design and print an adapter myself.
Print information:
Setting | Value |
|---|---|
Infill | 30 % |
Walls | 6 |
Supports | enabled, tree, paint-on as required |
Material | PET-G |
Print orientation | Lay object to the side so layer lines are perpendicular to the weight of the softbox. |
What else is needed?
- Tin foil for lining the inside surface of the adapter with reflective material
- Double-sided tape for adding the tin foil