BetaFPV VR04 VR04HD External Antenna Stay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Antenna Stay to help keep an after-market external antenna in place during flying.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 1
- Views
- 163
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I wanted to replace the standard antenna on my BetaFPV VR04 goggles. To do this, I removed the stock antenna and replaced it with
5.8Ghz SMA antenna (link to what I used - I am not claiming this is the best choice, just my choice)
RP-SMA 90 Degree Adapter RP-SMA Male to SMA Female Right Angle Connector (link to what I used)
I then encountered the issue that this 90-degree adapter swivels freely. I designed this "antenna stay" to slip over the SMA tightening nut and hold up the antenna, using friction.
The model kind of depends on the length of the right angle connector. If you ge one that is longer or a lot shorter, this will no longer work. I have no idea how standard these connectors are.
I'd imagine this works with the BetaFPV VR04 (HD) goggles, but make sure the selected antenna is appropriate.
It will probably only work when printed in TPU (95A) or similar flexible filament.