1 / 2
Feet for Carboy Dryer — image 1
1 / 2

Feet for Carboy Dryer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.74 – €0.90 net (excluding VAT)

For file: Carboy Dryer FootX4_0.6n_0.35mm_PETG_MK3S_39m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.82 excluding VAT (range midpoint).

Weight reported by the author
15 g
Print time reported by the author
38.4 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Get a little more height for drainage on the Carboy dryer https://www.printables.com/model/866603-carboy-dryer-stackable

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
7
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

Get a little more height (10mm) for drainage on the Carboy dryer https://www.printables.com/model/866603-carboy-dryer-stackable

These are 20mm tall with 10mm curve cut to match the dryer base. I printed 4 to raise the dryer/carboy 10mm. Helps clear the Star San bubbles...

Printed the carboy dryer with a .6 nozzle and .35 layer height so used that for the feet too.

Excellent carboy dryer model BTW!