Yet another planter!
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.32 – €1.61 net (excluding VAT)
For file: turing_planter_saucer_v1_0.4n_0.2mm_PLA_MK4SMMU3_49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.47 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 48.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Yet another planter, But this time with a gyroid pattern embossed. Drain holes and saucer included!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This texture wasn't sculpted — it was grown. The surface of this planter is the output of a real Gray-Scott reaction-diffusion simulation: the same mathematics Alan Turing proposed in 1952 to explain how animals get their stripes and spots. The pattern forms itself, wraps seamlessly around the pot, and fades elegantly into a clean rim and base.
It's as practical as it is pretty: the opening fits a standard 8 cm / 3″ nursery pot, so you can drop your plant straight in. Five drainage holes and a matching saucer are included.
Print settings:
No supports needed — texture relief stays under ~40°
0.2 mm layers, 3 walls, 10–15% infill
Matte or clay-look PLA shows the texture best; PETG for outdoor use (e.g. Prusament Terracota PETG) -> I used Colorfabb Stonefil Filament PLA
Pot Ø96 × 90 mm (~100 g), saucer Ø116 × 13 mm
Do NOT enable fuzzy skin — the math is the texture