MultiFunction Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MultiFunction Clock as featured on the Magmabow channel
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 82
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This clock uses the full 7-segment alphabet, which may be a bit confusing for characters that aren't typically seen on 7-segment displays. E.g "m"s "w"s and "x"s. Because of this the "Timr" text that shows up is a little funky.
This clock uses an accelerometer to detect shakes to change modes. The threshold is 3g (ish) so moving the clock normally won't trigger a mode change. Furthermore, there is a 3-second grace period between mode changes where the mode cannot be changed. This prevents the modes from rapidly cycling uncontrollably throughout the shake.
Modes
Clock: 24-hour format. Midday at startup. Dial adjusts time
Stopwatch: Count-up from 0 with an external cycling animation
Timer: Spin the dial to set a time up to 99h. When the dial hasn't been touched for a couple seconds, the timer will automatically start. When the time is up, the display beeps and flashes 10 times. Then it is primed to be used again
Thermometer: The clock uses the RTC chip's internal thermometer. This has an accuracy of +-3C but it is enough to estimate ambient temperature. Spinning the dial changes C to F
To learn more, I will be uploading a video on this project soon! https://www.youtube.com/@Magmabow
Check out PCBWay Here: https://pcbway.com/g/WQ1kw6
Find the Makera Z1 Here: https://makerainc.sjv.io/YVov7K
The tools section on my website: https://magmabow.com/tools