Shower Squeegee Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Squeegee Holder to keep Squeegee directly below shower head
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Squeegee Holder to keep squeegee easily accessible and out of the way. Designed to be a 0.85" wide opening at pipe, for the 0.8" outer diameter pipe. Can easily be scaled in your slicer in any direction to fit your specific needs.
I printed in ASA with 4 walls and 15% infill to allow some acetone smoothing! Should work great in PLA or PETG, even being directly against the hot pipe you shouldn't see over 60C at the pipe. No supports are needed as everything is designed to be printed laying flat on its "back".
Let me know of any improvements or changes you might recommend!