Vorfilter für Urlaubsbewässerungs‑Pumpe/ Pre-filter for a vacation irrigation pump
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vorfilter‑Halter für Gardena‑Pumpe, PETG, 15% Grid‑Infill; pre‑filter holder, PETG, 15% grid-infill
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dieses Modell ist ein selbst entwickelter Vorfilter‑Halter. Die Pumpe wird in das gedruckte Bauteil eingesetzt und anschließend gemeinsam mit dem Halter in einen kurzen Feinstrumpf gesteckt, der oben mit einem Band locker verschlossen wird. Das feinmaschige Textil des Strumpfs dient als zusätzlicher mechanischer Filter.
Kompatibilität:
Das Modell ist kompatibel mit der Pumpe der Gardena‑Urlaubsbewässerung. Es handelt sich um ein privat konstruiertes Zubehörteil, das in keiner Verbindung zum Hersteller steht und nicht von diesem geprüft, freigegeben oder unterstützt wird.
Der Vorfilter ist für Situationen gedacht, in denen das Bewässerungssystem Wasser aus einem Fass oder Behälter entnimmt, in dem sich Ablagerungen wie kalkhaltiger Schlamm bilden. Solche Partikel können Tropfer und Leitungen verstopfen. Durch die Kombination aus Halter und Feinstrumpf wird das Ansaugen feiner Partikel verhindert/ reduziert.
Hinweise:
Regelmäßige Kontrolle und Reinigung des Vorfilters wird empfohlen
Ich empfehle als Filament PETG, da es sehr gut für den Kontakt mit Wasser geeignet ist
Als Infill habe ich 15% Gitternetz gewählt, die Pumpe schwimmt damit nicht auf
Translation: DeepL
This model is a custom-designed pre-filter holder. The pump is inserted into the 3D-printed component and then, together with the holder, placed inside a short, fine-mesh stocking, which is loosely secured at the top with a band. The fine-mesh fabric of the stocking serves as an additional mechanical filter.
Compatibility:
This model is compatible with the Gardena Vacation Watering System pump. It is a privately designed accessory that is not affiliated with the manufacturer and has not been tested, approved, or endorsed by them.
The pre-filter is intended for situations in which the irrigation system draws water from a barrel or container where sediment such as calcareous sludge accumulates. Such particles can clog drippers and pipes. The combination of the holder and the fine-mesh stocking prevents or reduces the intake of fine particles.
Notes:
Regular inspection and cleaning of the pre-filter is recommended
I recommend using PETG filament, as it is very well suited for contact with water
I chose a 15% grid infill so that the pump does not float