Handcuffs (without additional hardware)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
99% printable and two little pices of 1,75 mm filament
- Rating
- 4.556 / 5
- Likes
- 178
- Downloads
- 1,455
- Makes
- 11
- Views
- 8,894
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an remix of a pair of handcuffs, desingned by sthone. (https://www.thingiverse.com/thing:2487050)
For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.
“Handcuffs_Spring” and “Handcuffs_Locking_Bar_Pawl” are printed twice, because they don't need to be mirrored. For the “Handcuffs_Spring” petg would be a better choice than pla.
And 2 Pins of 1.75 Filament are needed to secure the locking-bar (red on 3nd the pic).
The key is a normal handcuff key and not included in this model. You can use this key:https://www.printables.com/model/1402519-handcuff-key-for-realistic-handcuffs-without-addit
(https://www.printables.com/de/model/351099-toy-handcuffs-key)