Otofix d1 lite Kickstand & steering wheel holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a kickstand and steering whell holder i made for my Otofix D1 Lite
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
A kickstand and steering wheel holder for the Otofix D1 Lite. It requires you remove four screws from the back (i didn't mess with the qc stickered holes just in case) and replace them with m3x8 or m3x10 depending on end result thickness. The rotating post on the hinge "should" stay in place if i was a better designer or even print-in-place if modified; but as a failsafe i designed it to use a paper clip as a pin to hold everything in place. This smaller tablet will have a hard time hanging off the top of my steering wheels, i usually hang mine off the center where the air bag would be.
Update: i created a v2 with a slightly bigger odb2 holder.