1 / 10
Remix of Pill cutter by MacuBO for ~1 15/16" Utility Razor Blade — image 1
1 / 10

Remix of Pill cutter by MacuBO for ~1 15/16" Utility Razor Blade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Great original design, but I didn't have blades that fit. I found that my other remix for ~1.5" blades tended to flex…

Rating
0 / 5
Likes
12
Downloads
108
Makes
0
Views
1,054
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Great original design, but I didn't have blades that fit. I found that my other remix for ~1.5" blades tended to flex and bend. So, I decided to give it another go with some utility razors I had on hand.

I understand that not all utility razors are the same, make sure you check the size to see if the ones you have will fit.

Small bits (~ 5mm per side) of cut filament is used as an alignment tool for ensuring a proper gluing. The razor just fits right in the slot. Prior to gluing, slide the razor into the provided space before gluing the halves together to ensure a snug, secure fit.

I've found that with careful gluing, and ensuring the razor seats properly, I could remove the blade and put it back into place with just enough effort, so potentially the blade is replaceable.

It's not as sexy as the original, but it works! The MacuBo design is definitely the best pill cutter I've tried - other cutters tend to crush or cut wonky on occasion.

Hope this remix helps someone else.

Print Settings

Printer:

Voxelab Aquila

Rafts:

No

Supports:

Yes

Resolution:

0.2 mm

Infill:

30%

Filament:

dealers-choice PLA+

dealers-choice


Notes:

All parts are oriented the way I printed. Delete excessive supports to ensure that it doesn't get mucked-up with unnecessary plastic.

.stl and .3mf provided

Category: Hand Tools

Tags