Voxelab Aquila Adjustable Vertical LCD Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix is inspired by https://www.thingiverse.com/thing:4901758 by Junr05, but technically is a remix of the…
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 270
- Makes
- 7
- Views
- 1,002
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This remix is inspired by https://www.thingiverse.com/thing:4901758 by Junr05, but technically is a remix of the original fixed vertical mount listed. I had issues with the model by Junr05 - issues with the model downloaded showed in the final print, so I decided to start from the original.
Test prints done in PETG, with supports at a .28 layer height on an AM8 with E3DV6 bowden setup. (just bought the Voxelab Aquila as an upgrade). Filament choice is up to the user, however I prefer to print printer parts in PETG when I can. PLA or PLA+ should work just fine.
Adjustment is smooth and only requires loosening of the top M4x12 bolt. Does require the lower bolt to be close to or at max left justification on the rail, or the back of the mount will hit the rail. However, should suffice for most viewing angles.
Designed in Fusion360 (.f3d provided). Saved in .3mf and .stl formats
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
.28
Infill:
20%
Filament: dealers-choice dealers-choice
Category: 3D Printer Parts