1 / 5
Figurine Stand - Compatible with Labubu, Hirono, and other 17 cm dolls (unofficial) — image 1
1 / 5

Figurine Stand - Compatible with Labubu, Hirono, and other 17 cm dolls (unofficial)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keep your figurines standing upright and stop them from falling over using this easy to print stand.

Rating
0 / 5
Likes
5
Downloads
35
Makes
0
Views
172
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

An easy to print stand for your figurines. This fits Labubu and Hirono figurines well, and may fit other figurines that are roughly the same size. The height is adjustable. Put the parts together, and place the arm ring around the neck of the figurine.

When you're inserting the rod into the base, make sure to line it up correctly! The flat side should be on the back, the front side has a slight curve to the tip. You can also orient by the flared end, the flared part should be facing the front. Check the photos if you're having trouble.

The base is hegagonal so it can be tiled, and you can insert the rod at the edge or at the corner depending on how you want them tiled: insert at the corner like in the photos to tile them side by side, at the side for diagonal.

Prints with no supports. I suggest printing with a 0.4 mm nozzle at 0.2 mm layer height, which should be the standard on most printers.

Not an official stand by PopMart. Not affiliated or endorsed by PopMart or any other entities.

Tags