ExoGuitar - Bridge - Shredder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed guitar part — full catalog, build planner, and assembly guides at https://exoguitar.com
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com
Plan Your Build & Get Hardware
ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.
You can find this specific part, ExoGuitar - Bridge - Shredder, on our site.
Required Part: String Adjustment Assembly
String Adjustment Assembly is required to build this part. Build it first — its steps are below and its hardware is included in the list at the end. Full details, photos and files: https://exoguitar.com/part/bridge/string-adjustment-assembly/108662c3-9a42-5360-ae60-b451b80b0c04
💡 Tip: Print on a smooth plate, or sand down the textured side until it is smooth on each piece. The difference in height will make a large fitment difference.
Step 1: Insert 3mm Sleeve Bearing
Step 2: Assemble Adjustment Screw
Step 3: Finish Assembly
Using 3x BT3x8 (it MUST be BT3x8 and not M3x8), attach the sides to each other
ExoGuitar - Bridge - Shredder
Step 1: Insert Sandpaper
Using the same sandpaper you need to sand your frets, cut out a piece that matches the inside profile of the base and stick it in.
Info: Want a cooler color? Pick up some Grip Tape for skateboards instead! They've got a ton of cool colors and patterns online!
Step 2: Insert Heat Set Inserts
Step 3: Insert String Adjustment Assemblies
Step 4: Attach to 2020
Hardware
DIY Kit
You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $14.08 plus shipping.
Self Source
If you want to order the parts yourself, here's a list. Estimated cost: $85.94.