1 / 5
Remix: Chitu E1 Box Hygrometer Mount + Optimized PTFE Connector (M6/M10) for INDX — image 1
1 / 5

Remix: Chitu E1 Box Hygrometer Mount + Optimized PTFE Connector (M6/M10) for INDX

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PTFE Out and Hygrometer Holder divided

Rating
5 / 5
Likes
8
Downloads
19
Makes
1
Views
327
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Nachdem ich Jabdoas hervorragendes Modell zusammengebaut hatte, stellte ich fest, dass für meine spezifische (zukünftige) Konfiguration – die Kombination aus CoreOne INDX und Trockenbox – ein etwas anderer Aufbau sinnvoller war. Meine Trockenbox steht rechts neben dem Drucker, wobei die PTFE-Schläuche nach oben geführt werden. Daher ist es zweckmäßiger, die Auslässe an der Rückseite der Box zu nutzen und das Hygrometer an der Vorderseite zu belassen. Ich entfernte also den Rahmen für das Hygrometer und ersetzte ihn durch eine dünne Platte, wobei ich die Durchführungen des ursprünglichen Rahmens durch kürzere Blindstopfen austauschte. Auch die Verschraubungen wurden entsprechend angepasst.

Für die PTFE Verschraubungen laden Sie die Keile und die M10/M6-Muttern bitte vom Originalmodell herunter.

Zusätzlich habe ich noch Dichtungen für die Durchführungen gedruckt. Dazu beutze ich ein Varioflex Filament, das zwar sehr zum Nachsickern neigt (Varioflext eben) aber schön weiche Dichtungen produziert.

__________________________________________________________________

After assembling Jabdoa's excellent model, I realized that a slightly different setup made more sense for my specific (future) configuration—combining the CoreOne INDX and the dry box. My dry box sits to the right of the printer, with the PTFE tubes routed upwards. Consequently, it makes more sense to use the outlets at the rear of the box while keeping the hygrometer at the front. So, I removed the hygrometer frame and replaced it with a thin plate, substituting the pass-throughs on the original frame with shorter blanking plugs. The screw fittings were adjusted accordingly as well.

For the PTFE fittings, download the wedges and the M10/M6 nuts from the original model.

I also printed gaskets for the feed-throughs. For this, I use Varioflex filament; while it is very prone to oozing—being Varioflex, after all—it produces nice, soft gaskets.

Tags