Replacement Panel Fixing Nut for Schurter FIZ & FUL Fuse Holders (M18.5x2/2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric replacement M18.5x2/2 panel fixing nut compatible with Schurter FIZ & FUL fuse holders.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A custom, parametrically designed replacement panel fixing nut. Built in OpenSCAD using standard M18.5x2/2 double-start thread specifications, this model provides a clean, mathematically precise fit compatible with Schurter FIZ and FUL series panel-mount fuse holders.
Print Settings (The "Hot & Slow" Method for Optical Clarity) This part was optimized for structural integrity and maximum optical transparency using Overture Transparent PETG on a standard 0.4mm nozzle. To achieve a glass-like finish, you want to print hot to melt the layers together and slow to keep extrusion pressure perfectly consistent.
Material: Transparent PETG (Overture recommended)
Temperatures: 250°C Nozzle / 85°C Bed
Print Speeds: Unified at 35 mm/s across the board (crucial for consistent flow and clarity)
Acceleration: Capped at 1500–2000 mm/s²
Perimeters: 5
Infill: 100% Rectilinear (aligns the internal structure to allow light to pass through)
Batch Printing Notes: If you are printing a full build plate of these at once, highly consider adding a small ramping Z-hop (e.g., 1.5 mm) and tuning your retraction/wipe settings (I use 0.8 mm retract with a 20% wipe). This prevents the nozzle from knocking parts loose during travel moves and keeps stringing entirely out of those delicate threads.