KTM 790 / 890 Adventure Gepäckträger, tail rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stabiler Heckträger ohne Handgriffe für KTM 790/890 Adventure Clean tail rack for KTM 790/890 Adv. without grab handle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Der Heckträger ersetzt das Originalteil der KTM 790 / 890 Adventure. Die seitlichen Handgriffe fallen weg. Das sorgt für eine schmalere, cleanere Optik am Heck.
Es handelt sich um eine extra stabile Version (verstärkte Verschraubungspunkte), die das sichere Befestigen von Gepäcktaschen und Grundträgern (z. B. von Kriega) ermöglicht, ohne zu brechen.
Das KTM-Logo ist 2 mm vertieft. So kann man auf einen aufwendigen Mehrfarbdruck verzichten. Das Logo kann einfach separat in einer anderen Farbe gedruckt und anschließend eingeklebt werden.
Das separate Logo beim Drucken eventuell auf 99 % skalieren, damit es mit etwas Toleranz optimal in die Vertiefung passt.
Zwei Versionen verfügbar:
Version 1 (Basic): „Nacktes“ Modell mit glatter Oberfläche. Die STEP-Datei liegt bei, sodass sich jeder individuelle Befestigungslöcher einfügen oder die Auflagefläche nach eigenen Wünschen vergrößern/verkleinern kann.
Version 2 (Strukturiert / Kriega-Ready): Meine persönliche Version mit strukturierter Oberfläche und einem Hexagonmuster auf der Unterseite. Diese Version bietet zusätzlich links und rechts Befestigungsmöglichkeiten für Laschen (speziell für Kriega-Gepäcktaschen). Die Oberflächenstruktur (Punkte und Hexagon) wurde mit https://bumpmesh.com/ erstellt.
Materialempfehlung:
Prototyp: PETG eignet sich gut für einen ersten Fit-Test am Motorrad.
(Und wie bei jedem guten Maker verbleibt der Prototyp ein Leben lang am Fahrzeug :) )Endprodukt: Für den tatsächlichen Einsatz empfehle ich Nylon (PA), PC (Polycarbonat) oder ASA. Das Teil muss massiven Vibrationen, Belastungen durch das Gepäck sowie UV-Strahlung und Witterung standhalten.
Empfohlene Druckeinstellungen:
Ausrichtung / Supports: Das Hauptmodell im 45-Grad-Winkel drucken, um auf Support-Strukturen auf den großen Sichtflächen verzichten zu können. Support wird so nur im Bereich der Kanten benötigt.
Perimeter/Wände: Mindestens 5–6 (für strukturelle Stabilität)
Infill: 30–40 % (Gyroid oder Cubic empfohlen)
Layerhöhe: 0.2 mm oder 0.28 mm (für Nylon/ASA)
Montage:
Das Teil wird einfach an den originalen Befestigungspunkten mit den originalen Schrauben montiert.
---------------------------------------------------------------------------------------------------------------------
This tail rack replaces the original part of the KTM 790 / 890 Adventure. By removing the side grab handles, it provides a narrower, cleaner look at the rear.
This is an extra sturdy version (reinforced mounting points) that allows for secure attachment of luggage bags and base racks (e.g., from Kriega) without breaking.
The KTM logo is recessed by 2 mm, eliminating the need for complex multi-color printing. The logo can simply be printed separately in a different color and glued in place. (Tip: You may want to scale the separate logo down to 99% when printing so it fits perfectly into the recess with some tolerance).
Two versions available:
Version 1 (Basic): "Naked" model with a smooth surface. The STEP file is included so anyone can add custom mounting holes or resize the support area to their liking.
Version 2 (Textured / Kriega-Ready): My personal version with a textured surface and a hexagon pattern on the underside. This version also offers mounting points on the left and right for straps (specifically for Kriega luggage bags). The surface structure (dots and hexagon) was created using https://bumpmesh.com/.
Material Recommendation:
Prototype: PETG is well suited for an initial fit test on the motorcycle.
Final Product: For actual use on the motorcycle, I highly recommend Nylon (PA), PC (Polycarbonate), or ASA. The part must withstand massive vibrations, loads from luggage, as well as UV radiation and weather. Regular PLA or PETG will not be stable enough in the long run!
Recommended Print Settings:
Orientation / Supports: Print the main model at a 45-degree angle to avoid support structures on the large visible surfaces. Supports are only needed around the edges.
Perimeters/Walls: At least 5–6 (for structural stability)
Infill: 30–40% (Gyroid or Cubic recommended)
Layer height: 0.2 mm or 0.28 mm (for Nylon/ASA)
Assembly:
The part is simply mounted at the original mounting points using the original screws.