Basic PiKVM Switch holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a more professional way of mounting our PiKVM switches in the server room, so I designed this holder
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I needed a more professional way of mounting our PiKVM switches in the server room, so I designed this holder.
The Switches slide in from the front or the back, and is kept in place by using bigger screws on the sides of the case, replacing the original screws. I had some m2.5 thread stand-offs, which means I keep the original screws with the switches, by screwing them into the stand-offs
I recommend printing on the 'back' side as pictured in the slicer image, with supports to get the most strength and least supports.
I print in PETG, but PLA should also be fine, unless the switches are in a very warm environment
Update July 28th: Added a folder with thicker versions, where the outer walls are 3mm thick instead of 2mm
-Thor