Siboor BOOM Bed Cable Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed cable strain relief mount for the Siboor BOOM.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
An easy-to-install bed cable strain relief for the Siboor BOOM kit. Designed to drop in just as easily as the original stock part, but with significantly better cable support!
Installs seamlessly just like the original stock component—no complex modifications needed.
Keeps the bed heater wiring firmly secured using a few standard zip ties, eliminating flex and preventing strain on the connector/solder joints during fast print moves.
Acts as a physical guide to help align and position the magnetic build plate effortlessly every time.
### Hardware Needed:
3 Small Zip Ties (approx. 2.5mm width)
### Recommended Print Settings: ( Voron spec )
* Material: ABS or ASA
* Wall Loops: 4
* Top Layers: 5
* Bottom Layers: 5
* Infill: 40% Gyroid
* Supports: None