Vito W639 ventilation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Be safe and cool in van during summer
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 1
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Camper Van Side Window Ventilation Insert / Grille
A practical side window ventilation insert designed for camper vans Mercedes Vito. It provides fresh air flow while keeping the interior secure and weather-protected. Perfect for overnight camping or parking in warm weather.
Recommended Print Settings
Important: To get the open mesh/grille effect for the airflow section (as seen in the preview/photos), I strongly recommend using the provided 3MF project file (.3mf) or copying the custom layer height settings in PrusaSlicer!
The model uses a Height Range Modifier on specific layers to create the exposed infill pattern (grille):
Height Range Modifier: Applied to the ventilation area (e.g., layers between 9.00 mm – 11.55 mm / 11.60 mm)
Bottom Solid Layers: 0
Top Solid Layers: 0
Perimeters: 3
💡 Material & Printing Recommendations
Material: PETG, ASA, or ABS is strongly recommended for outdoor and automotive use. Standard PLA is not suitable as it may deform under direct sunlight and high interior car temperatures. I tested PETG witch carbon fiber and its stabel after 35° days
Supports: Painted supports applied where necessary.
Infill: 20% for the main body, 30% Grid for the mesh section.
If you like this model, feel free to share your makes and leave a rating! Happy camping!