MDT ORYX bag rider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
another MDT ORYX bad rider
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This remix of a MDT Oryx bag rider as much as I like the model the original base is so long that if you don't have an inch of spacers (with my T-rex arms I don't need) so the base went out the full length of the recoil pad. and the top corner where connects with the stock was to large so I increased the radius to clear that and shortened the over all height by all of 1.25 mm to get rid of the gap I was having on the bottom.
So minor tweaks that just might be the version of the stock, otherwise it's a great design from EvolvedGeometry. His recommendations for printing is PTEG .16 height 4 walls with 50% infill
Enjoy if you were looking for one